Southern State Community College | Semester
Bachelor of Science in Applied Science—Completion Program
Major: Mechanical Engineering Technology
For students entering Fall 2021 and after
Updated December 06, 2021
This Bachelor of Science in Applied Science Completion Program is designed for students who have completed an associate degree in Mechanical, Manufacturing, or similarly titled engineering technology programs. Graduates from other Engineering Technology programs will also receive favorable credit transfer. Through this program you can complete your BS degree by completing two-years of additional credit hours beyond your associate degree. Further information is available through http://www.miamioh.edu/regionals/ent.
This articulation is meant to be a guide only. Your final degree requirements are established upon matriculation to Miami and are detailed in your degree audit report (DAR) provided by Miami. Work closely with a Miami advisor (listed below) to clarify final requirements. Students entering this program must meet all admission requirements available at http://www.miamioh.edu/regionals/admission/transfer-students for transfer students or in the Miami Bulletin. For students who graduated from high school after 1985, these requirements include a foreign language in high school (two years) or college (one year). Students who do not meet these requirements at admission will still be admitted but must make up any deficiencies prior to graduating from Miami.
There are four areas of program requirements. About one-half of these requirements will be met while completing your associate degree. In addition, students must meet the general requirements for graduation from Miami which include a minimum of 30 credit hours taken from Miami and 12 of the last 30 credit hours must be taken from Miami. Students are also required to have a PC laptop.
Requirements Summary
- Complete your associate degree in Mechanical, Manufacturing, or similarly titled Engineering Technology program at your current college.
- Complete the Ohio Transfer 36 at your institution. This Module is available at https://www.ohiohighered.org/Ohio-Transfer-36. Click on Ohio Transfer 36: Approvals, then click your college. Once complete, have the registrar at your college notate completion in your transcript: “Ohio Transfer 36 Complete” and send the revised transcript to Miami. Advising for this module is available at your college. See the registrar or advising office.
- Complete general education requirements specified by the Engineering Technology (ENT) department. (*Included in the Ohio Transfer 36)
General Education Requirements Miami Engineering Technology Requirements Acceptable Southern State Community College Transfer Credit** * Included in the Ohio Transfer 36 ENG 111, One year of Freshman English College I Composition or ENG 109 College Composition for Second Language Writers ENGL 1101* English Composition I ECO 201 Microeconomics or ECO 202 Macroeconomics ECON 2205* Principles of Microeconomics or ECON 2206* Principles of Macroeconomics STC 135 Intro to Public Expression and Critical Inquiry or STC 136 Intro to Interpersonal Communication COMM 1115* Fundamentals of Effective Speech ENG 215 Workplace Writing or ENG 313 Technical Writing ENGL 2205 Technical Report Writing PHY 161 Physics for Life Sciences with Lab I or PHY 191 General Physics with Lab I PHYS 2201* General Physics I and PHYS 2211* Lab PHY 162 Physics for Life Sciences with Lab II or PHY 192 General Physics with Lab II PHYS 2202* General Physics II and PHYS 2212* Lab CHM 141 College Chemistry (3) and
CHM 144 College Chemistry Lab (2)
CHEM 1151* First Year Chemistry I and CHEM 1161* Lab MTH 125 Precalculus MATH 1141* College Algebra and MATH 1142 College Trigonometry MTH 151 Calculus I MATH 2221* Calculus I MTH 251 Calculus II MATH 2222* Calculus II Approved Intercultural Perspectives Elective (Online Options) PHIL 1107* Ethics - Complete Engineering Technology (ENT) core courses listed below. You should have taken some of these in your associate degree program. Calculus I must be completed prior to starting Miami courses.
Miami Requirements | Acceptable Southern State Community College Transfer Credit** |
---|---|
ENT 135 Computer-Aided Drafting [OET012 Computer Aided Design] | ENDS 2230 Advanced Concepts in 2D AutoCAD |
ENT 137 Introduction to Engineering Technology | ENDS 1100 Introduction to Engineering |
ENT 151 Engineering Materials [OET013 Engineering Materials] | ENDS 1151 Engineering Materials |
ENT 152 Computer Aided Mfg I (OET010 Mfg Processes) | ENDS 2233 Computer Aided Manufacturing |
ENT 192 Circuit Analysis I (OET001) | EENG 1105 DC Circuits & Devices |
ENT 235 Computer Aided Design | ENDS 2231 Introduction to 3D AutoCAD or ENDS 2232 Introduction to SolidWorks |
ENT 252 Computer Aided Mfg II | ENDS 2261 Manufacturing Materials & Processes |
ENT 271 Mechanics I: Statics [OET007 Statics] | ENDS 2201 Engineering Mechanics: Statics |
ENT 272 Mechanics II: Strength of Materials [OET008 Strength of Materials] | ENDS 2203 Strength of Materials |
ENT 278 Mechanics III: Analysis of Machine Components | Take from Miami |
CSE 163 Introduction to Computer Concepts and Programming or CSE 153 C/C++ Programming or similar course | CSCI 1121 Introduction to Computer Programming or CSCI 2260 Microcontroller Programming |
MTH 231 Discrete Math (3) or MTH 222 Introduction to Linear Algebra (3) (both meet MPT - Thematic Sequence requirement) | MATH 2250 Linear Algebra or Take from Miami |
STA 301 Applied Statistics *** or STA 261 Statistics (MPT) | MATH 2281 Introductory Statistics or Take from Miami |
MTH 245 Differential Equations for Engineers (MPT) | MATH 2230 Differential Equation or Take from Miami |
ENT 301 Dynamics *** | Take from Miami or take ENDS 2202 Dynamics from SSCC with a grade B or better |
ENT 310 Fluid Mechanics [OET009 Fluid Mechanics] *** | Take from Miami or take ENDS 2205 Hydraulics and Pneumatics from SSCC with a grade B or better |
ENT 312 Thermodynamics and Heat Power*** | Take from Miami |
ENT 314 Mechanisms for Machine Design*** | ENDS 2204 Mechanisms or Take from Miami |
ENT 316 Project Management *** | Take from Miami |
ENT 355 Introduction to Finite Element Analysis*** | Take from Miami |
ENT 404 Experimentation Techniques*** | Take from Miami |
ENT 415 Heat Transfer with Applications*** | Take from Miami |
ENT 416 Topics in Mechanical Vibrations*** | Take from Miami |
ENT 497 Senior Design I *** | Take from Miami |
ENT 498 Senior Design II *** | Take from Miami |
***Distance Courses Offered Via IVDL and/or WebEx from Miami. Calculus I must be completed prior to starting Miami courses. |
**Transfer Equivalencies within ENT program ONLY
To apply for this program: http://www.miamioh.edu/regionals/apply
For tuition information: https://miamioh.edu/onestop/your-money/tuition-fees/regional-campuses/index.html
For more information
Southern State Community College:
James Barnett Jr, Associate Professor Engineering, jbarnett@sscc.edu, 937-393-3431 x 2746Miami:
Dr. Zhiyuan (Tiger) Yu, MET Program Coordinator yuz29@miamioh.edu | 513-727-3378
Dr. Murat Dinc, MET Program Coordinator dincm@MiamiOH.edu | 513-727-3359
Professor Rob Speckert, Chief Department Advisor speckere@MiamiOH.edu | 513-785-1810
Sarah Wooten, Distance Coordinator sarah.wooten@MiamiOH.edu | 513-727-3417